Boiler tubing: Hardness testing methods of high-pressure boiler tubes

High pressure boiler tube hardness testing should take into account its mechanical properties, which is related to stainless steel as raw material for the deformation, such as punching, cutting processing performance and quality.

Therefore, all of the high-pressure boiler tubes need to conduct mechanical tests. Mechanical performance testing method is mainly divided into two kinds, one kind is tensile test, the other kind is usually hardness test.

Tensile test is the high pressure boiler tube sample, high pressure boiler tube tend to sample to the fracture on tensile testing machine, mechanical properties and determination of one or more, usually only determination of tensile strength, yield strength, break elongation, and reduction of area. Tensile test is the most basic mechanical properties of metallic materials testing methods, almost all of the metal material, as long as the requirements of the mechanical properties of the high pressure boiler tube, the provisions of the tensile test. Especially those appearance and high pressure boiler tube is not good for the material of hardness test, tensile test became the only means of mechanical properties testing.

Application: For high, middle, low pressure boiler and pressure purpose

Production Standard, Grade, Steel No:: ASTM A178 Grade A, C, D; ASTM A192; ASTM A210 GradeA-1, C; BS3059-Ⅰ 320 CFS; BS3059-Ⅱ 360, 440, 243, 620-460, 622-490, S1, S2, TC1, TC2; EN10216-1 P195TR1/TR2, P235TR1/TR2, P265TR1/TR2; EN10216-2 P195GH, P235GH, P265GH, TC1, TC2; DIN17175 ST35.8, ST45.8; DIN1629 ST37.0, ST44.0, ST50.0; JIS G3454 STPG370, STPG410; JIS G3461 STB340, STB410, STB440; GB5310 20G, 15MoG, 12CrMoG, 12Cr2MoG, 15CrMoG, 12Cr1MoVG,
Delivery Condition:: Annealed, Normalized, Normalized and Tempered
Inspection and Test:: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment:: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting